eSun PLA-Metal Filament 1.75mm 1kg (Antique Brass)

Jaunums

Preces kods: IAI63510

Preces statuss: 3-6 darba dienas

€2469 ar PVN
Vai jums ir jautājumi par šo preci? Jautāt
Ražotājs: eSun

eSun PLA-Metal 1.75 mm Filament

eSun PLA-Metal 1.75 mm filament in antique brass is a 3D printing material that gives models a metallic look without the need for painting or polishing. Prints have a satin, slightly matte finish with a metallic sheen and a delicately grainy texture that reduces the visibility of layers. The filament does not contain metal powder, and its properties make it ideal for printing decorations, figurines, props, and historical models. The spool contains 1 kg of material designed for FDM 3D printers that support a 1.75 mm diameter.

Metallic finish and sharp details

The filament’s distinctive texture works well for creating decorative details and objects styled to resemble old metal elements. The material has a stable diameter and minimal shrinkage, which reduces the risk of warping, cracking, and stringing. Good layer adhesion increases the strength of the models, and supports are easy to remove, which speeds up the finishing of more complex prints. The filament is wound evenly onto the spool, reducing the risk of tangling during printing.

Printing Parameters and Compatibility

The filament is compatible with FDM 3D printers that support 1.75 mm filament, including appropriately configured models from Creality, Prusa, Raise3D, and Voron. The recommended nozzle temperature is 190–230 °C, the bed temperature is 45–60 °C, and the print speed is 40–100 mm/s. The heat deflection temperature is 53 °C, so finished models should not be used in areas exposed to high temperatures, such as inside a car left in the sun. The filament is vacuum-sealed with a desiccant, which protects the material from moisture until the package is opened.

 

ManufacturereSUN
ModelPLA-Metal
MaterialPLA without metal powder additive
Colorantique brass
Filament diameter1.75 mm
Net weight of filament1 kg
Finishsatin, slightly matte, with a metallic sheen
Printing technologyFDM
Nozzle temperature190–230 °C
Bed temperature45–60 °C
Recommended print speed40–100 mm/s
Recommended fan speed100%
Density1.225 g/cm³
Tensile strength63 MPa
Elongation at break11.6%
Flexural strength92 MPa
Flexural modulus3274 MPa
IZOD impact strength5 kJ/m²
Heat Deflection Temperature (HDT)53 °C

Par šo preci pagaidām nav atsauksmes!

Jaunumu abonēšana
Uzrakstīt
Piezvanīt