Filament SUNLU High-Speed Matte PETG (red)

New

Product code: IAI64178

Available quantity 3-6 working days

€1592 inc VAT
Have any questions about this item? Ask
Manufacturer: Sunlu

SUNLU High-Speed Matte PETG Filament (red)

SUNLU High-Speed Matte PETG is a 3D printing filament that allows you to print at speeds ranging from 50 to as high as 600 mm/s while maintaining smooth extrusion and good surface quality. The increased fluidity of the molten material ensures smooth filament feeding during high-speed printing, while good layer adhesion and a design that minimizes the risk of nozzle clogging contribute to stable operation. The matte, low-gloss surface reduces reflections and gives models an aesthetic finish, making the material suitable for both functional and decorative prints. The filament diameter is 1.75 ±0.02 mm, and each spool contains 1 kg of material, approximately 330 m in length.

Up to 600 mm/s and a smooth, matte finish

High-Speed Matte PETG can be used at various print speeds—for 50–100 mm/s, the recommended nozzle temperature is 205–215°C for 100–300 mm/s, it is 240–250°C and for 300–600 mm/s, 260–270°C should be used. The material combines high printing speeds with good strength, flexibility, and resistance to impact, wear, and various chemicals, making it suitable for prototypes, functional parts, mechanical designs, and DIY projects, among other applications. The tensile strength is 48 MPa, the flexural strength is 78 MPa, and the elongation at break is 33%, which allows for the creation of durable models with good layer adhesion.

Optimal Conditions for Stable Printing

The recommended bed temperature is 60–70°C at 70–80°C, no adhesive is required however, if using an unheated platform, adhesive must be applied. Due to its increased fluidity, PETG is more susceptible to moisture, which can cause stringing, material leakage, and a deterioration in print quality therefore, the filament must be thoroughly dried before printing and protected from moisture during long print runs. The recommended humidity during storage and printing is below 20% RH when stored in an airtight container with a desiccant, and the drying setting is 50°C for SUNLU S4/E2 dryers, 65°C for at least 8 hours is recommended.

 

ManufacturerSUNLU
NameHigh-Speed Matte PETG
ColorRed
MaterialPETG
Filament Diameter1.75 ±0.02 mm
Print Speed50–600 mm/s
Nozzle temperature for 50–100 mm/s205–215°C
Nozzle temperature for 100–300 mm/s240–250°C
Nozzle temperature for 300–600 mm/s260–270°C
Bed temperature60–70°C
Bed temperature without adhesive70–80°C
Recommended humidity< 20% RH
Drying temperature50°C
Recommended drying in SUNLU S4/E265°C for at least 8 hours
Density1.26 g/cm³
Heat deflection temperature70°C
Melting point128°C
Melt flow rate4.4 g/10 min
Tensile strength48 MPa
Elongation at break33%
Flexural strength78 MPa
Flexural modulus2700 MPa
IZOD impact strength (X-Y notch)4.1 kJ/m²
Net weight1 kg
Gross weight1.3 kg
Filament lengthApproximately 330 m

There are no reviews for this product!

Newsletter subscription
Write
Call us