Everpower 12V 10A Smart Battery Charger with LCD Display

The Everpower EPA1210L 4in1 intelligent and automatic charger is an innovation in the field of charging and testing Gel, AGM, lead-acid, and LiFePO4 batteries. The device can also be used as a 12V DC power adapter. Traditional charging alone is not enough to ensure constant battery performance and active, long-term functioning. This charger enables an individually tailored charging process and constant supervision of all functions. The compact Everpower charger is an excellent choice for all 12V lead-acid batteries with a capacity from 30Ah to 300Ah and 14.4V (4S pack) LiFePO4 with a capacity of 9-108Ah. Controlled by a microprocessor and charging characteristics, the technology as well as state-of-the-art software control and supervise the charging process completely automatically. The battery can remain connected for months. Overcharging is impossible. This guarantees a long service life for the cells. The charger can be used to test the state of the battery. Changing the operating modes is done via the Mode button on the front of the housing. Available settings: standard (GEL, VRLA, SLA), AGM, LiFePO4, DC power supply, low-temperature charging, and battery testing. All important information about the battery, current charging voltage, and charging status are visible on the LCD display. The integrated safety circuit system ensures safe operation. It has overcurrent, reverse polarity, short circuit, overheating, and overvoltage protection. If the mains power is connected and the battery is not, the charger will automatically enter the energy-saving ECO mode.

Functions: charging, testing, power supply

• Low-temperature charging mode (below -10°C)

• For lead-acid, gel, AGM, and LiFePO4 batteries

• 12V 10A DC power supply output parameters

• Full microprocessor control

• Supports lead-acid batteries from 30Ah to 300Ah

• Supports LiFePO4 batteries from 9Ah to 108Ah (14.4V voltage)

• Ecological and energy-saving ECO mode

• Uses SAE quick connector

• Intelligent selection of charging speed for battery capacity

• Detection of the type of connected battery

• Capable of charging a deeply discharged or heavily sulfated battery

• Reverse polarity protection, short circuit, and sparking protection on contacts

• Very low energy consumption in standby mode

• Readable LCD display showing the operating status

• Overcharge protection during trickle/maintenance charging

• Material: fire-retardant PC

• Certificates: CE, RoHS, FC

Charging stages:

1. Battery analysis

2. Soft start of charging

3. Bulk charging with constant current

4. Capacity formation

5. Maintenance charging

6. Trickle charging

• Model: EPA1210L

• Type: Smart / Automatic

• Input voltage: 220V-240V AC 50/60Hz 1.5V

• Battery capacities: from 30Ah to 300Ah (lead-acid, gel, AGM) from 9Ah to 108Ah (LiFePO4)

• Output voltage: 13.8V 10A for lead-acid batteries (Pb) 14.9V 10A for AGM batteries 14.4V 9A for LiFePO4 batteries 12V 10A for DC power supply

• Cables protected by fuse: 25A

• Material: fire-retardant PC

• Protection class: IP65 (dust protected, splash-proof)

• Operating temperature: -10°C ~ 50°C

• Storage temperature: -10°C ~ 50°C

• Dimensions: 226 x 100 x 57mm

• Gross weight: 1042g