Filament eSun PLA-Matte Dual 1.75mm 1kg (black-red)

Новинка

Код товара: IAI63540

Доступное количество: 3-6 рабочих дня

€2246 включая НДС
Есть вопросы об этом товаре? Задать вопрос
Производитель: eSun

eSun PLA-Matte Dual 1.75 mm Filament

The eSun PLA-Matte Dual 1.75 mm, 1 kg filament in black and red is a 3D printing material for FDM technology that combines two distinctly separate colors in a single filament. This allows you to create two-color models without having to change filaments during printing. The matte finish reduces the visibility of print layers, improving the appearance of the finished parts. The material is characterized by low shrinkage, minimal warping, and easy removal of support structures. It is ideal for creating decorations, cosplay accessories, large models, and prototypes used to test initial design concepts.

Stable printing and easy support removal

Thanks to stable and even filament feed, the material ensures uninterrupted operation even during long print jobs. Smooth feeding reduces the risk of nozzle clogs, and its low brittleness minimizes the risk of breakage. The filament also allows for easy removal of support structures from the finished model, which simplifies post-processing after printing. It is important to note that the material is relatively soft, so the feed pressure should not be too high to avoid hindering proper filament feeding.

Printing Parameters

The eSun PLA-Matte Dual filament allows for printing at speeds ranging from 40 to 300 mm/s at a nozzle temperature of 215–230°C and a bed temperature of 45–60°C. The best results are achieved with 100% post-print cooling. The parameters provided are based on a 0.4 mm nozzle diameter and may vary when using other diameters. The appropriate settings allow you to take advantage of the material’s properties when printing both small decorative elements and larger projects.

 

ManufacturereSun
ModelPLA-Matte Dual
Material TypePLA
Colorblack and red
Filament Diameter1.75 mm
Filament Net Weight1 kg
Printing TechnologyFDM
Surface Finishmatte
Nozzle temperature215–230°C
Bed temperature45–60°C
Recommended print speed40–300 mm/s
Cooling100%
Density1.174 g/cm³
Tensile strength13.58 MPa
Elongation at break39%
Flexural strength56.72 MPa
Heat deflection temperature54°C

Нет отзывов об этом товаре, но вы можете быть первым и написать!

Подпискa на рассылку
Написать
Позвонить