XTAR EC1 battery charger

The EC1 XTAR is a lithium-ion battery charger with micro USB charging input. The charger can charge one battery, format: 16650/18650. Thanks to the TC / CC / CV loading algorithm and real-time detection, the charger is an intelligent and safe device.

• Automatically selects the charging current
• Three-stage TC / CC / CV loading process controlled by the processor
• Protection against damage due to incorrect placement of the battery and against short-circuiting
• Automatic termination of charging and resuming of charging when the voltage drops
• The smooth loading technology ensures a longer service life of the cell
• It has the function to reactivate strongly discharged cells
• LED indicator for charging mode and battery status
• Fast processor Charger for Li-ion cells in sizes 16650/18650
• Only for high voltage cells 3, 8V/3, 85V
• LED light showing the charging status
• Three-stage charging method: TC/CC/CV
• Reactivation of deeply discharged cells and 0V cells
• charging Current: 0, 7a | Charging Voltage: 4, 35V
• Powered by Micro USB-no power supply included
• Protection: Thermal, short-circuit, before the reverse insertion of the battery

The Xtar EC1 Charger has a function of reactivating deeply discharged cells and cells with a Voltage Of 0v. Many chargers on the market are not able to charge such batteries. Here with the help comes the charger Xtar EC1, which in many cases allows you to resave such cells. Just insert a deeply discharged battery into the EC1 charger, as with normal charging, the charger detects the unloaded link and attempts to reactivate it. Attention! Cells unloaded below a certain level are irreversible and reactivated may not be possible. Avoid too deep discharge of Li-ion batteries-this can lead to a significant reduction in their durability and capacity or to their total malfunction.

Chargers from other manufacturers can significantly increase the temperature of the cells being charged during charging. Excessive heating of the cells can cause them to wear more quickly. When designing the EC1 charger, Xtar went one step further from the competition, solving this problem easily: the power supply from an external power supply was applied. This ensures that the charging temperature in the EC1 battery rises by up to 15 degrees.

Supplied with the Xtar EC1 Charger, we receive a micro USB cable. The power supply is not Included In the set. Any charger with a micro USB cable, for example, is enough to power the charger. Phone, or USB port or a computer with a free USB socket. The recommended minimum charger power is 0, 7A (700mA).

• Ent Xtar Charger Model EC1 Supported Battery types Li-Ion 3.8 batteries-3, 85V, protected and unprotected Supported Battery Sizes 16650, 18650 Maximum battery length 70mm Input voltage and
• Input current 5V 0, 7A Power connector Micro USB Power supply included Not Recommended power supply Minimum 5V 0, 5A,
• Recommended 5V 0, 7A Charging method Processor-controlled TC/CC/CV Charging
• In the CC phase 0, 7A End Voltage
• Loading 4, 35V ± 0, 05V Current of terminations < 100mA Additional functions Reactivation of deeply discharged cells and cells 0V Security Thermal
• Short Circuit