3V (Volt) RCR123A battery based on Li-ion technology with 3000mWh and 1000mAh.
A full replacement for the non-rechargeable 3V CR123A photo battery. A built-in lithium-ion battery with a nominal voltage of 3.6V to 3.7V is regulated down to 3V by electronics on a PCB.
The stable and high output voltage makes these 3-volt lithium-ion batteries compatible with all devices optimized for use with disposable batteries. The higher voltage results in higher performance in many devices for example, many flashlights and string lights are brighter, and motors (in toys and kitchen appliances) run faster than with non-rechargeable batteries.
Replacement for CR123 A, CR123 R, R-CR123, CR17335, CR17345, DL123A, EL123AP, K123LA, L123A .
Ideally suited for: Wildlife cameras, string lights, model making, radios, photo equipment, flash units and much more. (Please note the maximum current output of 2A (amperes))
Disadvantages: The electronic control only allows the discharge current of 2A specified in the specifications, which can lead to problems with electric drives during the start-up phase.
Important: Keeppower 3V Li-ion batteries can only be charged via the integrated USB-C port. Charging with a conventional charger for NiMH/NiCd or Li-ion batteries is not permitted.
Charging is done via the integrated USB port using any 5V USB port. A colored LED on the end of the batteries indicates the charging status. Charge your batteries on the go using any 5V USB port (smartphone, power adapter, power bank, laptop, etc.), giving you flexibility and ensuring you always have a charging option available.
- Model: P1634TC
- Capacity in mWh: 3000mWh
- Capacity in mAh: 1000mAh
- Minimum capacity in mAh: 900mAh / 0.2C mA
- Nominal voltage: 3V (Volts)
- Charging voltage: 5V USB
- Standard charging current: 0.33A (330±50mA) USB
- Max. discharge current: 2A (2000mA)
- Positive terminal: raised (Button Top)
- Achievable number of cycles: approximately 500 cycles
- Diameter: 16.60 mm ± 0.2 mm
- Height: 34.55 mm ± 0.3 mm
- Weight: 29 g ± 1 g